米坛社区 2024 下半年社区版主招募中🔥
![捕夢網 [Dreamcatcher]](/data/resource_icons/1/1638.jpg?1675441992){kind=icon}
[请原谅我的中文不好，我用了一个在线翻译器]
如果你喜欢做清醒的梦，这个应用程序会帮助你。其原理非常简单--当你睡觉时，手镯会以设定的时间间隔振动。
睡眠初始页
开始 - 自动或通过设置中的一个按钮设置闹钟的时间（只能禁用和手动启用）。
睡眠 - 从睡眠开始到第一个警报响起的时间
结束 - 振动的结束时间。
所有睡眠--振动的结束时间取决于睡眠时间
如果这两项设置都是关闭的，振动将在整个睡眠过程中持续进行。
特点。
1. 可以在设定的时间自动启动（如果腕带被重置，计时器将不会启动）或手动启动。
2. 设置第一次启动 - 腕带将在你开始睡觉后的设定时间开始振动。
3. 该应用程序检测夜间醒来，如果它属于间隙--如果醒来的时间超过5分钟，计时器将被移动（例如。手镯每小时振动一次。3:00它振动了，3:15-3:30你醒了。现在，下一次它将在4:15、5:15、6:15......）振动。如果不在间隔时间内，计时器就不会动（手镯每小时振动一次。2:40-2:45，你已经醒了。3:00它振动了，因为手镯中的信息没有更新，看看为什么，现在下一次它将在4:00振动)
4. 你可以设置你自己的旋律来振动
5. 振动结束--按正常时间、睡眠时间或继续所有的睡眠结束
6. 自动停止 - 如果你醒来并开始行走，应用程序将检测到这一点。
7. 日志 - 腕带记录了一个简单的活动日志。
8. 开源代码
9. 多种语言的机器翻译
弊端。
1. 在后台运行不起作用，手镯每20分钟打开一次定时器并运行。根据这个应用程序，必须手动启动或确保手镯在白天不被重新启动
2. 每次运行时可能会显示一个黄色的小部件--可能会影响到睡眠
3.你不能用手镯来捕捉睡眠阶段。首先，这些相位本身的检测效果很差，但这是问题的一半。其次，睡眠信息的更新方式不同，每半小时到一小时更新一次，也就是说，睡眠的最后阶段总是被推迟，而且有一半的情况下信息不正确。当已经收集到足够的数据时，通常在醒来之后，就开始计算各阶段。所以在最好的情况下，你只能粗略地知道15分钟前你在哪个阶段，在半夜的某个地方。
4.由于数据不正确，当你已经醒了的时候，它可能会出现振动。
5. 不能跟踪日间或不规则的睡眠。大量的夜间行走也会破坏操作。
初步版本。
如果你喜欢做清醒的梦，这个应用程序会帮助你。其原理非常简单--当你睡觉时，手镯会以设定的时间间隔振动。
睡眠初始页
开始 - 自动或通过设置中的一个按钮设置闹钟的时间（只能禁用和手动启用）。
睡眠 - 从睡眠开始到第一个警报响起的时间
结束 - 振动的结束时间。
所有睡眠--振动的结束时间取决于睡眠时间
如果这两项设置都是关闭的，振动将在整个睡眠过程中持续进行。
特点。
1. 可以在设定的时间自动启动（如果腕带被重置，计时器将不会启动）或手动启动。
2. 设置第一次启动 - 腕带将在你开始睡觉后的设定时间开始振动。
3. 该应用程序检测夜间醒来，如果它属于间隙--如果醒来的时间超过5分钟，计时器将被移动（例如。手镯每小时振动一次。3:00它振动了，3:15-3:30你醒了。现在，下一次它将在4:15、5:15、6:15......）振动。如果不在间隔时间内，计时器就不会动（手镯每小时振动一次。2:40-2:45，你已经醒了。3:00它振动了，因为手镯中的信息没有更新，看看为什么，现在下一次它将在4:00振动)
4. 你可以设置你自己的旋律来振动
5. 振动结束--按正常时间、睡眠时间或继续所有的睡眠结束
6. 自动停止 - 如果你醒来并开始行走，应用程序将检测到这一点。
7. 日志 - 腕带记录了一个简单的活动日志。
8. 开源代码
9. 多种语言的机器翻译
弊端。
1. 在后台运行不起作用，手镯每20分钟打开一次定时器并运行。根据这个应用程序，必须手动启动或确保手镯在白天不被重新启动
2. 每次运行时可能会显示一个黄色的小部件--可能会影响到睡眠
3.你不能用手镯来捕捉睡眠阶段。首先，这些相位本身的检测效果很差，但这是问题的一半。其次，睡眠信息的更新方式不同，每半小时到一小时更新一次，也就是说，睡眠的最后阶段总是被推迟，而且有一半的情况下信息不正确。当已经收集到足够的数据时，通常在醒来之后，就开始计算各阶段。所以在最好的情况下，你只能粗略地知道15分钟前你在哪个阶段，在半夜的某个地方。
4.由于数据不正确，当你已经醒了的时候，它可能会出现振动。
5. 不能跟踪日间或不规则的睡眠。大量的夜间行走也会破坏操作。
初步版本。
Dreamcatcher
The app will help you if you're into lucid dream. The principle is very simple - when you sleep, the bracelet will vibrate at a set interval.
Features:
1. You can start automatically at a set time (if the bracelet is reset the timer will NOT work) or manually
2. Set the first start - the bracelet will start to vibrate at the set time after the start of sleep.
3. The app detects waking up at night and if it falls in the gap - the timer will be shifted if waking up is longer than 5 minutes (example. The bracelet vibrates every hour. 3:00 it vibrated, 3:15-3:30 you woke up. Now the next time it will vibrate at 4:15, 5:15, 6:15...). If it is not in the interval - the timer will not be shifted ( The bracelet vibrates every hour. 2:40-2:45 you are awake. 3:00 it vibrated because the information in the bracelet is not updated, see why, now the next time it will vibrate at 4:00)
4. You can set your own melody to vibrate
5. End of vibration - either by normal time, or by sleep time, or continue all sleep
6. Automatic stop - if you wake up and start walking, the app will detect it.
7. Log - the bracelet records a simple log of the operation.
8. Open source code.
9. Machine translation in many languages
Cons:
1. Running in the background does not work, the bracelet once every 20 minutes turns on a timer and runs. According to this application must either be started manually, or watch to ensure that the bracelet is not restarted during the day
2. Each launch can display a yellow widget - can interfere with sleep
3. you cannot use the bracelet to catch sleep phases. First, the phases themselves are poorly detected, but this is half the trouble. Second, the information about sleep is updated differently, every half an hour to an hour, that is, the last phase of sleep is always delayed, and the information in half the cases is not correct. The calculation of the phases starts when enough data have already been collected, usually after waking up. So in the best case, you can only roughly know what phase was 15 minutes ago, somewhere in the middle of the night.
4. because of incorrect data it may vibrate when you are already awake
5. Can't track daytime or irregular sleep. A lot of walking at night will also break it.
The app will help you if you're into lucid dream. The principle is very simple - when you sleep, the bracelet will vibrate at a set interval.
Features:
1. You can start automatically at a set time (if the bracelet is reset the timer will NOT work) or manually
2. Set the first start - the bracelet will start to vibrate at the set time after the start of sleep.
3. The app detects waking up at night and if it falls in the gap - the timer will be shifted if waking up is longer than 5 minutes (example. The bracelet vibrates every hour. 3:00 it vibrated, 3:15-3:30 you woke up. Now the next time it will vibrate at 4:15, 5:15, 6:15...). If it is not in the interval - the timer will not be shifted ( The bracelet vibrates every hour. 2:40-2:45 you are awake. 3:00 it vibrated because the information in the bracelet is not updated, see why, now the next time it will vibrate at 4:00)
4. You can set your own melody to vibrate
5. End of vibration - either by normal time, or by sleep time, or continue all sleep
6. Automatic stop - if you wake up and start walking, the app will detect it.
7. Log - the bracelet records a simple log of the operation.
8. Open source code.
9. Machine translation in many languages
Cons:
1. Running in the background does not work, the bracelet once every 20 minutes turns on a timer and runs. According to this application must either be started manually, or watch to ensure that the bracelet is not restarted during the day
2. Each launch can display a yellow widget - can interfere with sleep
3. you cannot use the bracelet to catch sleep phases. First, the phases themselves are poorly detected, but this is half the trouble. Second, the information about sleep is updated differently, every half an hour to an hour, that is, the last phase of sleep is always delayed, and the information in half the cases is not correct. The calculation of the phases starts when enough data have already been collected, usually after waking up. So in the best case, you can only roughly know what phase was 15 minutes ago, somewhere in the middle of the night.
4. because of incorrect data it may vibrate when you are already awake
5. Can't track daytime or irregular sleep. A lot of walking at night will also break it.
![间隔闹钟 [Interval timer]](/data/resource_icons/1/1634.jpg?1674994101){kind=icon}
